Installation Guide

From EmuVR Wiki
Revision as of 18:31, 28 October 2018 by EmuVR (Talk | contribs)

Jump to: navigation, search

Installation

  1. Download the following archives;
  2. Create a folder for EmuVR (for this example, we'll use C:\EmuVR, but it can exist anywhere).
  3. Extract the contents of EmuVR 1.0.2.7z to C:\EmuVR
    • Note: If you end up with C:\EmuVR\EmuVR, move everything out of there into C:\EmuVR. It should look like this;
      Install emuvr folder.png
  4. Extract RetroArch.7z to C:\EmuVR\Retroarch
  5. Copy your games to C:\EmuVR\Games. In this example, we can use the following SNES homebrew game, "Hilda" from https://gamejolt.com/games/hilda/162284 (you can use any ROM(s) you like).
    1. For this example, create C:\EmuVR\Games\SNES
      • The name of the folder doesn't matter, as long as it's descriptive.
      • Each console will have it's own folder, e.g. "N64", "Genesis", etc.
      • You can delete the default "SystemX/Y/Z" folders, they're just examples.
    2. Move the .zip (or .sfc, etc) into C:\EmuVR\Games\SNES
      • Note: EmuVR loads labels textures for all of your games into your video card memory (VRAM) at launch. As such, adding a large number of games could freeze EmuVR when loading them at start. There is no known upper limit, but keep in mind that migrating a full list of ROMSs from a previous library is not recommended (e.g., thousands of games). You should start at around 200~300 games, then go up.
  6. Add games to EmuVR
    1. Run C:\EmuVR\Game Scanner\Game Scanner.exe
    2. Click "Attempt Autofill"
    3. Make sure C:\EmuVR\Games\SNES has been added, it's Media is "SNES", and a related Core is selected.
      • In this case, I'm going to manually select "Nintendo - SNES / Famicom (Snes9x)" because I've tested it and it works well.
    4. Click "Save Changes".
    5. Click "Download Missing Cores" (wait for the download to complete and click "Ok")
    6. Click "Scan Games for EmuVR" (Wait for the scan to complete, then click "Ok")
  7. Run C:\EmuVR\EmuVR.exe and make sure your consoles and carts are available in your inventory menu
    • If you would like to run in Desktop Mode, execute "Force Desktop.exe" in the same place as EmuVR.exe.

Adding games after the initial install

  1. Run C:\EmuVR\Game Scanner\Game Scanner.exe
  2. Click "Attempt Autofill"
  3. Make sure the folders you've added to C:\EmuVR\Games have been added. If not, click on "Add Folder..." and add it.
    • Make sure to select the correct Media type and Core
  4. Click "Save Changes".
  5. Click "Download Missing Cores" (wait for the download to complete and click "Ok")
  6. Click "Scan Games for EmuVR" (Wait for the scan to complete, then click "Ok")

Customizing game labels, posters, etc

Please see Customization.

Troubleshooting

Please see Troubleshooting.